WARDFIL is a stainless steel dirt separator which protects closed-circuit systems from circulating impurities. These impurities, mainly consisting of sand and mud, are retained by a wide filtering bag which reduces the frequency of required cleaning operations. Each filter is designed to accomodate Neodymium magnetic candles ideal for removing ferrous contamination. The valve installed on the top cover can be potentially be used to add chemicals for system cleaning.
Thanks to the wide range of available filtering bags, WARDFIL efficiently removes even the smallest particles with minimum pressure loss.
INSTALLATION
In closed-circuit applications it is advised to install WARDFIL on a side-stream pipe. This layout ensures non-stop protection to the system and no interruptions of the flow to the end users.
TECHNICAL SPECIFICATIONS
Materials |
Filter Housing |
Stainless Steel AISI 304 – AISI 316L |
Filter Bag |
PET |
Gaskets |
EPDM* |
Drain/Vent Valve |
Nickel-plated Brass – AISI 316L |
Pressure Gauges |
Stainless Steel AISI 304 – AISI 316L |
Surface fnishing |
Microshot Peening and Passivation |
Design Data |
Flow rate |
Up to 70 m³/h |
Design Pressure (bar) |
PN 10 |
Max Temperature (°C) |
90 |
Salinity |
< 10.000 ppm |
pH range |
3-9 |
Design Code |
PED 68/2014/EU |
*Certifed to comply to the following European Drinking Water regulations: UBA,
DVGW standard W-270, WRAS and ACS